Asprinn Reverse Osmosis RO Membrane Element 50 GPD/190 LPD | USA Made to Approx. 0.0001 Micron (GT13-59)
The Asprinn Reverse Osmosis Membrane element can produce up to 50 GPD/190 Litres Per Day with a 1:1 permeate (clean water) to concentrate (wastewater) ratio, when used with a 200CC Flow Restrictor (on the waste line) on Chlorinated Mains Water at 70 PSI/482 kPa inlet pressure. Ideal for the reduction of TDS and common municipal water contaminants such as Heavy Metals, Fluoride, Minerals and Salts.
This RO Membrane component is Tested and Certified to NSF/ANSI Standard 58.
Inorganic Organic Rejection
This membrane is capable of contaminant reduction rates as follows:
- Aluminum 98%
- Adrazin Over 98%
- Arsenic 98%
- Aldrin Over 98%
- Benzene Over 98%
- Barium 95%
- Chlorine Over 98%
- Cadmium 95%
- Chloroform Over 98%
- Calcium 98%
- DOT Over 98%
- Chloride 95%
- Dichlormethane Over 98%
- Chromium VI 98%
- Endrin Over 98%
- Copper 98%
- Fluoranthene Over 98%
- Fluoride 95%
- Herbicides Over 98%
- Iron 98%
- Lindane Over 98%
- Lead 98%
- Methoxychlor Over 98%
- Magnesium 98%
- PCB Over 98%
- Manganese 98%
- Pesticides Over 98%
- Mercury II 85%
- Perchloroethylene Over 98%
- Nitrate 90%
- Phenol Over 98%
- Potassium 95%
- Tannic Acids Over 98%
- Selenium IV 95%
- Toxaphene Over 98%
- Silver 98%
- Trichlorethlene Over 98%
- Sodium 95%
- Trihalomethanes Over 98%
- Strontium 98%
- Volatile Organic Compounds (VOCs) Over 98%
- Sulphate 98%
- Total Dissolved Solids 95%
- Zinc 98%
Disclaimer from the Manufacturer: The use of this product in and of itself does not necessarily guarantee the removal of cysts and pathogens from water. Effective cyst and pathogen reduction is dependent on the complete system design and on the operation and maintenance of the system. Permeate from the first hour of operation should be discarded.
